Property & Real Estate Info:

Delivered by FeedBurner

Daily update via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Prevent seeped in Floor Bathroom

Prevent seeped in Floor Bathroom

Prevent seeped in Floor Bathroom

So as not to be seepage of water from the bathroom floor there are 3 steps that can be taken to prevent leakage or seeped

When building the bathroom, especially on the upper floor, leak checking is very important. The goal, so as not to be seepage of water from the floor to the walls and ceiling creeping underneath, To prevent leakage and seeped when building the bathroom, the following three steps that you can do.

1. Clean the bathroom floor before tiling the floor. Then flush with water cement floor to close the pores on the surface of the concrete floor. By closing the pores floor, water seeped potential can be minimized. The mixture like dough but more dilute.

2. In damp conditions, plywood floor with a layer of cement-based waterproofing. This type has the advantage as a coating leak in an area that holds water. It is better to Coating with at least 2 times, from the pattern of perpendicular.

3. Perform a leak test. Close all drains like floor drain. Then do the stream of water and let stand for about 2 to 3 days. After that, check the concrete of the floor underneath is there any water seepage left. Repeat the first step when they occur in the water trail no.

  • Share on Tumblr

Comments are closed.